Radial J48 Active Direct Box

Radial Engineering - Radial J48 Active Direct Box

Code: radial-j48



Product Description

J48 Phantom Powered Active Direct Box
The Radial J48 Active Direct Box.
Ultra low distortion of all type
Exceptional headroom & dynamic range
Retains instrument's natural sound
Powered by 48V phantom


Specifications Specifications are subject to change without notice. Audio circuit type: Proprietary analog circuit with low-noise op-amp Frequency response: 20Hz ~ 20kHz ( 1.5dB) Signal to noise ratio: Dynamic range: 109dB Noise floor: -99dB below 0dBu Equivalent input noise: -103dBu Maximum input: +10dBu Phase deviation: +10 at 20Hz | 0 at 1kHz | -1 at 20kHz Total harmonic distortion: 0.002% @ -5dBu Inter-modulation distortion: 0.003% @ -3dBu Input impedance: 220kΩ - " input Output impedance: 600Ω - XLR output Features Merge function: IN and THRU jacks are summed to mono Input pad: -15dB Polarity: 180 signal polarity reverse switch Low-cut filter: -3 dB @ 80Hz Ground lift: Disconnects pin-1 at XLR output XLR configuration: AES standard (pin-2 hot) General Power: 48V phantom - proprietary digital switching Construction: 14 gauge steel chassis and outer shell, baked enamel finish Size: 3.3" x 5.0" x 2" (84 x 127 x 48mm) Weight: 1.55 lb (720 g) FCC approval: Complies with section 15 of the FCC Rules Warranty: Radial 3-year, transferable