The A-16II Personal Mixer allows each performer to create a unique, customized monitor mix on stage or in the studio.
The A-16II allows individual performers to create custom monitor mixes tailored to their individual needs. Designed for use in live performance or in the studio, the A-16II Personal Mixer gives each performer control over channel volume, grouping, pan, stereo spread, and master volume and tone. Every Personal Mixer in a system can create a unique monitor mix for a performer. Users can save and recall up to sixteen custom mixes as presets in their Personal Mixer.
The stereo output from the A-16II can be used to drive wired or wireless in-the-ear monitors, headphones, powered floor wedges, an amplifier, or spot monitors.
The A-16II Personal Mixer is fully compatible with all Pro16™ Series products, including Aviom's digital interface card for Yamaha® digital mixing consoles. Support for Aviom monitor mixing is available in the form of console interface cards from an ever- increasing list of digital console manufacturers including Digidesign®, Soundcraft®, Innovason®, etc. Look for the A-Net Active™ logo, and see our Partners page for additional information.
Mixers can be daisy-chained or connected in parallel using an A-Net Distributor. Parallel connections also allow power to be supplied to the mixers over the Cat-5e cable. As with all Pro16 Series products, Cat-5e cable runs of up to 500 feet (150 meters) are possible between devices, and there is no limit to the number of mixers in a system.
Specifications:
|
Audio Output |
1/4-inch TRS stereo, headphone or line level |
|
Line/Headphone TRS Output |
Tip: Audio Left; Ring: Audio Right; Sleeve: Ground
Auto-detects mono plugs |
|
A-Net Input/Output |
1 A-Net input, 1 A-Net output; Category 5 (RJ45 connector) |
|
Digital to Analog Conversion Bit Depth |
24 bit
|
|
Signal to Noise Ratio |
(Referenced to 0dB) -103dB |
|
Latency |
<0.880 msec (measured from analog input to analog output) |
|
Pro16 A-Net |
uses unshielded Cat-5e UTP (or better) cable; maximum 500ft (150m) between devices |
|
Tone Controls |
Treble +/-12dB at 9kHz shelving |
|
Bass +/-12dB at 160Hz shelving |
|
Maximum Levels (RMS) |
Line/Headphone outs: 1.0 watt at 100 ohms |
|
Impedance
|
Line/Headphone outs: 32 ohms |
|
Power Supply
Input Voltage
Output Voltage
Plug Size |
External, DC, universal switching type
100-240 volts, 50/60Hz, 30VA
18-24 VDC, 0.5 amp
2 mm |
|
Dimensions |
10.75" (273 mm) wide x 5.6" (142.2 mm) deep;
2.25" (57.5 mm) high |
|
Weight |
3.4 lbs. (1.54 kilos)
|
|
Options |
MT-1 Mic Stand Mount |
|
EB-1 Extension Bracket |
Features:
* 16-channel stereo mixer
* Fully adjustable pan per channel
* Line/headphone audio output
* Auto-detect mono/stereo circuitry
* Simple set-up with Cat-5e cables
* Sixteen Preset locations for storing custom mixes
* Channel solo, mute, and group functions
* Global trim for reducing all channel volumes
* Sixteen channel select buttons with dual LEDs
* Pan/Spread control with LED readout
* Channel volume control with LED level readout
* Master Volume, Treble, and Bass controls
* Mounts easily on a mic stand with the optional MT-1 Mic Stand Mount
Resources:
A-16II User Guide
A-16II Data Sheet
Aviom Pro16 Series Brochure
Aviom & the Worship Experience
Aviom Pro64 Series Brochure
